One. The properties of steel fiber produced by different manufacturing methods of steel fiber manufacturers are also different. Although steel fiber came out soon, it has been used more more widely. Steel fiber is a kind of fiber whose diameter ratio (the ratio of fiber length to diameter, when the fiber section is non-circular, the diameter of equivalent section circle area) is 40-80, which is produced by cutting thin steel wire, shearing cold rolled strip, milling ingot rapid condensation of molten steel. General mixing equipment is large small, but the basic function is the same, so the added program should be basically the same. On the conveyor belt, the dry sand stone materials are generally fed into the hopper first. According to the design proportion, they are fed into the mixing hopper first, an appropriate amount of steel fiber is added into the dry materials according to the design requirements. See the usage proportion. Steel belt manufacturer

（3） When the sand, stone fiber are all poured into the hopper, dry mixing can be carried out (remember to add water), generally dry mixing for 1-2 minutes.

4. Add water (the amount of water) to mix steel fiber reinforced concrete (please note that the amount of water is too much, otherwise it is easy to agglomerate), the loaded cement concrete can be transported to the place of use.

Five. In the paving process, large machinery manual paving can be used, which is the same as ordinary concrete pavement. After the completion of the pavement, the roller must be used to vibrate compact, without bubbles sand holes, so as to ensure the authenticity of steel fiber concrete.

Figure 6. Finally, the surface of steel fiber reinforced concrete can be leveled manually mechanically. Be careful to expose it to the surface.